Problems after upgrade / new install

[acm3]

I spend the last 14 hours or so fixing my box.

I had an older toaster, so I basically went through a new install.

I went through, qmail installed fine.  Seemed to be working good at that point.  But, my apachec/mysql/php was broken at this point.

I spent the few hours getting that worked out (mostly).

I ended up with:
FreeBSD 4.11 Stable
Apache 1.3.33_Mod_SSL
MySQL 4.1
PHP 4.4.0

Now that I have those main functions working, I have the following problem with qmail.  I can't get the pop3/smtp to run.

This is what I get:
-su-2.05b# qmail stat
pop3: up (pid 5891) 0 seconds
send: up (pid 355) 1096 seconds
smtp: up (pid 5892) 0 seconds
submit: up (pid 5890) 0 seconds
pop3/log: up (pid 356) 1096 seconds
send/log: up (pid 358) 1096 seconds
smtp/log: up (pid 357) 1096 seconds
submit/log: up (pid 365) 1096 seconds

This is an entry from one of the logs:
/usr/libexec/ld-elf.so.1: Shared object "libmysqlclien
t.so.10" not found, required by "tcpserver"

I've tried to fix this with no luck, and I haven't found any other info on it.

Any insite on getting this patched up would be great.  Everything was working before I had to reinstall apache/mysql/php.

Regards,

Michael

[matt]

The mysql library that tcpserver was built against is now missing as a result of your MySQL upgrade. Delete the tcpserver binary or deinstall the ucspi-tcp port and then run toaster_setup.pl -s ucspi.

[acm3]

Thanks for that help.

That worked for the smtp/submit.  pop3 still won't stay up.  I even restarted the box, just incase I had  some freak thing holding it up.

Now this is the output:
-su-2.05b# qmail stat
pop3: up (pid 25193) 0 seconds
send: up (pid 25117) 47 seconds
smtp: up (pid 25115) 47 seconds
submit: up (pid 25119) 47 seconds
pop3/log: up (pid 25114) 47 seconds
send/log: up (pid 25118) 47 seconds
smtp/log: up (pid 25116) 47 seconds
submit/log: up (pid 25120) 47 seconds

And a few minutes later:
-su-2.05b# qmail stat
pop3: up (pid 1188) 1 seconds
send: up (pid 354) 247 seconds
smtp: up (pid 993) 56 seconds
submit: up (pid 997) 56 seconds
pop3/log: up (pid 357) 247 seconds
send/log: up (pid 359) 247 seconds
smtp/log: up (pid 356) 247 seconds
submit/log: up (pid 360) 247 seconds


I checked the log for the pop3, and this is it:
tcpserver: fatal: unable to bind: address already used

I'm not sure if that's normal for the pop3, since I my previous toaster did not utilize it yet.  If it's normal, then I won't worry about it.

[matt]

It's telling you that something else is bound to your POP3 port. Most likely, it's an older version of courier-pop3d. Make sure there are no run files for courier-pop3 in /usr/local/etc/rc.d. Kill any courier-tcpd processes that are listing to port 110. Then your qmail-pop3d will be able to bind to the pop3 port.

[acm3]

ahh...  That was it.

Still have an old pop3d.sh startup script.  Removed that and it working now.

The only other thing I noticed is that smtp/submit restarts about every 3-4 minutes...   Any ideas on what would be causing that?

There is also an old spamd.sh script, which I will assume should be removed also.

-su-2.05b# qmail stat
pop3: up (pid 318) 437 seconds
send: up (pid 323) 437 seconds
smtp: up (pid 1346) 14 seconds
submit: up (pid 1349) 14 seconds
pop3/log: up (pid 325) 437 seconds
send/log: up (pid 332) 437 seconds
smtp/log: up (pid 327) 437 seconds
submit/log: up (pid 331) 437 seconds

Ahh...

Checked the logs on the smtp, and I'm still getting this error occasionally:
/usr/libexec/ld-elf.so.1: Shared object "libmysqlclien
t.so.10" not found, required by "qmail-smtpd"

I would also assume that is the cause of the submit restarting, since there isn't anything in that log.

Just run toaster_setup.pl -s qmail ?? or is there a file I should remove first

Thanks for the quick help.  It's a lot easier to fix up then I thought it would be.